In the previous article of this series I described the requirements of 40 CFR 265.32 – Required equipment.  That section identified the equipment (communication, spill response, and fire suppression) required of applicable facilities (LQGs and SQGs).

This article is the fourth in a series that will look closely at each section of 40 CFR 265, Subpart C and explain its requirements, how they apply to generators of hazardous waste, and what is required for compliance.  Keep in mind that the regulations of your State may differ from these Federal regulations.

The purpose of this article: identify and explain the requirements of 40 CFR 265.33 – Testing and maintenance of equipment for generators of hazardous waste under the emergency preparedness and prevention regulations of 40 CFR 265, subpart C.

Hold on a minute!  These regulations were revised and moved to a new location within Title 40 of the CFR by the Generator Improvements Rule.  If your state has not yet adopted the Generator Improvements Rule, then this article is still applicable to you (but it won’t be for much longer).  If your state has adopted and been authorized to enforce the Generator Improvements Rule, then these regulations no longer apply to you.  Read: What is the status of the Generator Improvements Rule in my state?

To see an explanation of these regulations as revised by the Generator Improvements Rule you must refer to the following:

• Large quantity generator of hazardous waste (LQG)
• Small quantity generator of hazardous waste (SQG)

To see an explanation of the regulations prior to the revisions of the Generator Improvements Rule, please continue reading this article.

(more…)