Texas Commission on Environmental Quality to Host Pollution Prevention Waste Management Workshop

Texas Commission on Environmental Quality to Host Pollution Prevention Waste Management Workshop

A business should always be looking for ways to reduce the amount of waste it generates.  Those generators that are the status of a large quantity generator or small quantity generator are subject to the requirements of the Waste Minimization Certification which mandates certain pollution prevention efforts.

Not sure of your hazardous waste generator status?
 TAKE THIS SHORT SURVEY

The state of Texas takes this one step further by including in the Texas Administrative Code a requirement for subject facilities to comply with the Pollution Prevention Planning regulations of the Texas Commission on Environmental Quality (TCEQ) at 30 TAC 335, subchapter Q.

Texas facilities subject to the Pollution Prevention Planning regulations are:

  • Large quantity generators of hazardous waste and small quantity generators of hazardous waste that submit the Annual Waste Summary.
  • All facilities that submit the Toxic Release Inventory (TRI).

I don’t intend to summarize all of the requirements of the P2 Planning regulations here.  Instead I’ll direct you to two guidance documents from the TCEQ:

Too much?  Need help?  Don’t worry, that’s what the TCEQ is here for!

TCEQ is hosting a Pollution Prevention Waste Management Workshop on September 7, 2016 at the J.J. Pickle Research Campus, The University of Texas at Austin.

You can find more information and/or register for the workshop at the TCEQ event page:  TCEQ Pollution Prevention Waste Management Workshop

What better way to learn the requirements of the P2 Planning regulations than the agency that enforces them?

Contact me with any questions you may have about the generation, identification, management, and disposal of hazardous waste

Daniels Training Services

815.821.1550

Info@DanielsTraining.com

https://www.danielstraining.com/